新聞中心
滾柱絲杠的使用優勢
來源:http://m.zhzdh888.com/ 日期:2022-12-13 發布人:
滾柱絲杠的使用優勢:
Advantages of roller screw:
1.在同樣體積的情況下,滾柱絲杠有更大的接觸面積,將承載力平均分散在更大的表面。從而減小了摩擦力并延長了使用壽命。
1. In the case of the same volume, the roller lead screw has a larger contact area, and the bearing capacity is evenly distributed on a larger surface. Thus, the friction force is reduced and the service life is prolonged.
2.滾珠絲杠的珠子在輥道相互運動的方向不同,而滾柱是同步運行在主絲杠上的。于此滾柱絲杠能承受更高的輸入轉速?gòu)亩鴮?shí)現更大的直線速度。
2. The beads of the ball screw move in different directions with each other on the roller table, while the roller runs on the main screw synchronously. In this way, the roller lead screw can bear higher input speed to achieve greater linear speed.


3.滾珠絲杠內的珠子在輥道內需要在某一點上做方向切換,滾柱與主絲杠與同步做圓周運動,這就是為什么滾柱絲杠擁有更小振動和噪音。
3. The beads in the ball screw need to switch directions at a certain point in the roller table, and the roller and the main lead screw move in a circle synchronously, which is why the roller lead screw has less vibration and noise.
傳動轉速達5000r/min,高線速度達2000mm/s,荷載運動可達1000萬次以上,與現代的滾珠絲杠相比,其軸向承載力高3~5倍以上,使用壽命高10倍以上
The transmission speed reaches 5000r/min, the high linear speed reaches 2000mm/s, and the load movement can reach more than 10 million times. Compared with the modern international advanced ball screw, its axial bearing capacity is more than 3-5 times higher, and its service life is more than 10 times longer
滾柱絲桿分類
Classification of roller screws
行星滾柱絲杠分類為:滾柱非循環式與滾柱循環式。
Planetary roller lead screws are classified into roller non circulation type and roller circulation type.
以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.zhzdh888.com
The above is a detailed introduction to the guide screw, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://m.zhzdh888.com
相關新聞 /RELATED TO RECOMMEND
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25
導軌絲杠:機床精度的核心內功,制造破局不靠低價靠硬功
2026-03-24
直線模組選型難?吃透導軌絲杠這篇就夠了
2026-03-24
導軌絲杠卡死、精度下降?避開這些坑,少走半年彎路
2026-03-23
一文讀懂《傳動技術基礎(滾珠絲杠)》:滾珠絲杠的結構+精度+選型
2026-03-19
導軌絲杠硬核解析:行星滾珠絲杠,機器人的精密“超級肌肉”
2026-03-18
相關產品 /RELATED TO RECOMMEND





