新聞中心
導軌容易生銹,該如何預防?
來源:http://m.zhzdh888.com/ 日期:2022-12-07 發布人:
金屬容易生銹,這是行業常識,但是保護的好,可以防止生銹,大大延長壽命。所以,ABBA導軌生銹的主要原因就是我們對于ABBA導軌的養護做得不到位。
Metals are easy to rust, which is the common sense of the industry. However, good protection can prevent rust and greatly extend the service life. Therefore, the main reason for ABBA guide rail rusting is that our maintenance of ABBA guide rail is not in place.
其實,ABBA導軌在出廠的時分,或許在加工商加工出來的時分,他都會在上面擦洗一層防銹油,那么為什么還會生銹。
In fact, when ABBA guide rails leave the factory, or when they are processed by the processor, they will scrub a layer of antirust oil on them, so why do they rust.


對于這個問題,咱們詢問了許多客戶的運用情況,得出的定論一致是:他們運用結束后,就放在了庫房里,也沒有在運用結束后做一些防護辦法,下面,小編為咱們介紹幾種防護辦法:
For this question, we asked many customers about their use, and the conclusion is that they put it in the warehouse after the use, and did not do some protective measures after the use. Here are some protective measures:
一、在運用結束后,在ABBA導軌上面擦洗一層防銹油;
1、 After the use, wipe a layer of antirust oil on the ABBA guide rail;
二、放在常溫庫房里,不要有腐蝕性的東西混在一同;
2、 Put it in the normal temperature warehouse, and do not mix corrosive things together;
三、要一致庫房支架,不要把不用的ABBA導軌放在地下,由于地下防銹油蒸發的快,所以這一點必定要注意;
3、 The warehouse support shall be consistent, and the unused ABBA guide rail shall not be placed underground. Due to the rapid evaporation of underground antirust oil, this must be noted;
以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.zhzdh888.com
The above is a detailed introduction to the guide screw, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://m.zhzdh888.com
- 上一篇:直線導軌安裝的一些疑難問題
- 下一篇:空間小導軌壓力的方法
相關新聞 /RELATED TO RECOMMEND
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25
導軌絲杠:機床精度的核心內功,制造破局不靠低價靠硬功
2026-03-24
直線模組選型難?吃透導軌絲杠這篇就夠了
2026-03-24
導軌絲杠卡死、精度下降?避開這些坑,少走半年彎路
2026-03-23
一文讀懂《傳動技術基礎(滾珠絲杠)》:滾珠絲杠的結構+精度+選型
2026-03-19
導軌絲杠硬核解析:行星滾珠絲杠,機器人的精密“超級肌肉”
2026-03-18





