新聞中心
你知道如何避免直線導軌的摩擦嗎?
來源:http://m.zhzdh888.com/ 日期:2022-05-24 發布人:
在大多數情況下,流體潤滑只限于邊界區域,由金屬接觸而產生的直接摩擦是無法避免的,在這種摩擦中,大量的能量以摩擦損耗被浪費掉了。
In most cases, fluid lubrication is limited to the boundary area, and the direct friction caused by metal contact is unavoidable. In this friction, a large amount of energy is wasted by friction loss.
大多數情形下只需脂潤滑就充足了,這使得在機床的潤滑體系計劃及利用維護方面都變得特別很是輕易轉動直線導軌的滑塊與導軌間為微間隙或負間隙,因而可以大大的進步導軌的總體剛性和活動精度。可在非凡情況如粉塵、惡劣天色和用水情況下利用。
In most cases, grease lubrication is sufficient, which makes the lubrication system planning, utilization and maintenance of the machine tool especially easy to rotate. There is a micro gap or negative gap between the sliding block of the linear guide rail and the guide rail, which can greatly improve the overall rigidity and dynamic accuracy of the guide rail. It can be used under special conditions such as dust, bad weather and water use.


自潤模組不單可以增長使用者維護上的便利性,并且其模組化的計劃更可以讓客戶直接采辦自潤模組套件安置到滑塊上,便可到達潤滑零件的功效。
The self-lubricating module can not only increase the convenience of user maintenance, but also its modular plan allows customers to directly purchase the self-lubricating module kit and place it on the slider to achieve the effect of lubricating parts.
機器計劃因轉動直線導軌里的鋼珠孕生彈性變形而接收安置面偏差從而可以低落導軌安置根本面的平整度請求,低落機械加工本錢。線性導軌具備將安置導軌的底子加工及組裝時孕生的垂直度、平面度、交叉度等校直偏差平均化后舉行接收的特征。因此采納直線導軌可以大大進步機器計劃的效力。
The machine plans to receive the deviation of the installation surface due to the elastic deformation of the steel balls in the rotating linear guide rail, so as to reduce the flatness requirements of the basic installation surface of the guide rail and the machining cost. The linear guide rail has the characteristics of receiving after averaging the verticality, flatness, intersection and other straightening deviations generated during the processing and assembly of the bottom of the guide rail. Therefore, the adoption of linear guide rail can greatly improve the effectiveness of the machine plan.
滾動面的摩擦損耗也相應減少,故能使直線滾動導軌系統長期處于高精度狀態。
The friction loss of the rolling surface is correspondingly reduced, so the linear rolling guide rail system can be in a high-precision state for a long time.
本文的精彩內容由導軌絲杠提供知識提供,本網站還有很多的精彩內容,更多的內容您可以點擊進入:http://m.zhzdh888.com我們有專門的客服為您解答問題
The wonderful content of this article is provided by the guide screw. There are many wonderful content on this website. You can click to enter more content: http://m.zhzdh888.com We have special customer service to answer your questions
相關新聞 /RELATED TO RECOMMEND
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25
導軌絲杠:機床精度的核心內功,制造破局不靠低價靠硬功
2026-03-24
直線模組選型難?吃透導軌絲杠這篇就夠了
2026-03-24
導軌絲杠卡死、精度下降?避開這些坑,少走半年彎路
2026-03-23
一文讀懂《傳動技術基礎(滾珠絲杠)》:滾珠絲杠的結構+精度+選型
2026-03-19
導軌絲杠硬核解析:行星滾珠絲杠,機器人的精密“超級肌肉”
2026-03-18





